Hasulith Jewelry Glue - 30ml (1)
Available quantity : 48
- Origin : Germany
- Conditioning : Sold by 1
Hasulith Jewelry Glue - 30ml.
RECOMMENDED FOR THE GLUING OF metals, glass, ceramics and china, stone, leather, wood, felt, fabrics, paper,
cardboard and some hard plastics (like e.g. Polyacrylates (Plexi), ABS and
Celluloseacetat.
HASULITH® Vielzweckkleber is also very appropriate for gluing glass-,
Strass-, or simili-rhinestones to metals and other materials. More details
about gluing stones you will find in the Appendix” on page 2
For gluing semi-precious-stones (e.g. lapis-lazuli, turquois, carnelian…)
HASULITH® Vielzweckkleber is only recommended if stones are not
lubricated or greased for better gloss (but usually they are – please ask
your stone supplier).
HASULITH® is not recommended for gluing materials like
PVC, PET, Styropor®, PE, PP, rubber, Nylon or soft plastics.
APPLICATION : The gluing areas have to be dry and clean – (free from dust, grease, oil,
lubricants and other adherents).
For optimum results it is important, that surfaces to be joined fit well together.
For application HASULITH® is put on one side of the parts to be joined. If one or both parts are absorbent materials (e.g. felt,
leather, fabrics) the adhesive should be put on both parts. After putting on the adhesive, the parts should be joined immediately with slight
pressure. Excesses of adhesive should be removed -e.g. with a cloth- if necessary. Afterwards the gluing should be allowed to get dry on ambient
temperature without mechanical stress. In some cases, it can be necessary to fix the parts for a few minutes in the desired position until some initial fastness is achieved.
On gluing stones in most cases, it is more favourable to put the adhesive on the other parts to be glued (e.g. metal) – not on the stone.
DRYING : Drying time mainly depends on the size of the glue area and the
properties of the glued materials. Small gluing areas are quicker dry than bigger ones. If one of the glued parts is permeable to solvents -e.g.leather- drying time is comparatively quicker. If the glued area is not too
big, some initial fastness is achieved already after a few minutes.
• After one hour drying at ambient temperature, the glued objects can be handled with some care -e.g. moved to another place-.
• Overnight usually the gluing strength is good enough to pack and mail the glued objects.
• Because of the variety of possible applications, the total drying time can not be predicted precisely, but as a rule of thumb maximum bond
strength is achieved after 12-24 hours in most cases.
